In this section we will see how to remotely Program your own flash file
1-Connect to remote computer vie Teamvieweri Anydesk etc...
2-Copy Remoteconnector2023.exe (You can find it on the desktop) to Remote connected pc.
3-Run Remoteconnector2023.exe
4- Open Flash Editor Plus and on Main screnn Click on Main Page Phoenix Remote Connection
5- From the opened remote page click "Remote Flash Programing With Phoneix Diagnostic Tool".
|
5a-If wanted Read and edit Parameter, Select Parameter Ecu Box Add the Ecu you want to edit your parameters.
|
6- When clicked "Remote Flash Programing With Phoneix Diagnostic Tool" Editor will start remote setting. When Came Message "Ready For Remote" Ready codes to join Remote pc. Turn on Remote pc and fill codes same Customer Id to Customer Id ,Remote Code to Remote Code , Remote Pass to Remote Pass on Remote pc.
7-Now on Remote PC Remote Connector Exe:After entering the codes received from the Editor on the Remote Connector, press Start To Connect.
The Remote Connector connects to the Vehicle and receives its information and transmits this information to you.
When you see "Waiting To Remote File From Client" Turn your Editor and start Select your File.
8-Now on Flash Editor Plus Remote Connection Page:
8a: If on Select Parameter Ecu Box Added, before needed parameter edit on Parameter Programing For Remote. "Parameter Programing For Remote" More Info you see in "Parameter Programing For Remote" page.
9-For Local Your File Click Flash Editor and select your file.
|
9a-Press Selection Image for selecting to Local Downlanded File.. After Select File.
9b-After Selected File Press Edit Image button on Page and wait to came selected Flash informatioın page..
|
10-When you select and open the Flash File, a page with Flash information will appear.
Flash information is on this page.
11-Now that the Flash File is opened, I can send the Flash file to the Remote PC. For Sending to Remote Click "Send Remote".
|
11a= If your file have Multipe Ecu. You send All or select one.
Remove Ecu From List Button: If have Multipe Ecu and you want program one ecu "Will Program Ecu's" box select any ecu and Click "Remove ECU From List" Button. Editor will remove Selected ecu from Programing list. ****New Flash Editor Plus Support Multiple Ecu Programiming. 11b-After setted Programing Flash Ecus Click "Save Ecu's For Programing" and send File remote. |
12-After the Flash File settings are made, the File sending system will work.
When Came Message " File Sennded For Remote" , Remote Connector will start programing Remote PC Vehicle.
