This Module You can edit your XML/Tmp files and Send in Techtool
Programing With Techtool -->Local File
1-Press Local File...
2-Select your xml or Tmp file..
*** If selected TMP File You needed Client id and Dealer Id where dowland from Volvo Central account info
3-After Selected File Press Edit Image on Local File Page
4- Flash Information Page
Selected Truck ECU's Infomations
Here you can see Selected ECU's Part Information
Flash Hw's Info
Here you can see Opened Flash Part Information
Flash Chassis Info
Here you can see Opened Flash Chassis and Vin Information....
Edit Chassis on Hex Button:You Can edit Chassis id and VIN in hex..
When Press Change Chassis Button. Editor auto Change in Hex File. After programing On Techtool not needed change Chassis on Techtool.
|
Flash Ecu Info
Here you can see Dataset 1 , Dataset 2 and CSW Names...
Flash Dataset
Here you can see subdataset ınfo (Support mid 128 ,140,130)
Flash Tools
Get Hex Button: You Can Get Flash Hex Files. If you edit hex file you needed same place...(Supported Only Local Own files)
Check Hex Files Auto Button: PDT tool will hex files have any error..
Send Techtool Button: When Pressed this button Tool Encrypt File and Send in Techtool. After Go Techtool and program Ecu